Vilene Tear-Away Water-Soluble Embroidery Backing is a specialty embroidery stabilizer designed to provide temporary support during stitching and straightforward removal once the project is complete. Its unique construction allows the majority of the stabilizer to be gently torn away after embroidery, while any remaining fibers dissolve in water for a clean, nearly invisible finish. This combination makes it especially useful for projects where excess stabilizer would be difficult to remove completely or might affect the appearance of the finished design..
Width: 12"
Roll Length: 10 yards
Fiber Content: Water-Soluble Fibers (Composition not listed)
Weight: 1.3 oz
Application: Tear-Away
Removal Method: Water-Soluble
Construction: Embroidery Stabilizer
Color: White
Hoop securely with the fabric before stitching
Tear away excess stabilizer after embroidery
Remove any remaining fibers with water according to the manufacturer's instructions
Test on a sample before using on delicate fabrics
Pellon® SF101 Shape-Flex® is a lightweight woven fusible cotton interfacing designed to add stability while preserving the natural drape and feel of fabric. “Fusible” means that a heat-activated adhesive bonds the interfacing to the fabric during pressing, allowing the two layers to behave as one during construction. Unlike non-woven interfacings, its woven construction behaves much like the material it supports, helping garments and accessories maintain their flexibility rather than becoming stiff. It provides gentle reinforcement without adding noticeable bulk, making it one of the most versatile interfacings for collars, cuffs, waistbands, bags, quilting, and countless everyday sewing projects.
Width: 60"
Bolt Length: 10 yards
Fiber Content: 100% Cotton
Weight: Lightweight
Application: Fusible (1-sided)
Construction: Woven
Color: Black and White
Follow the manufacturer's pressing instructions.
Test on a fabric scrap before fusing.
Pre-shrinking is recommended when working with fabrics that will be laundered.
Store rolled or flat to prevent creasing.
Pellon® SF101 Shape-Flex® is a lightweight woven fusible cotton interfacing designed to add stability while preserving the natural drape and feel of fabric. “Fusible” means that a heat-activated adhesive bonds the interfacing to the fabric during pressing, allowing the two layers to behave as one during construction. Unlike non-woven interfacings, its woven construction behaves much like the material it supports, helping garments and accessories maintain their flexibility rather than becoming stiff. It provides gentle reinforcement without adding noticeable bulk, making it one of the most versatile interfacings for collars, cuffs, waistbands, bags, quilting, and countless everyday sewing projects. For projects that benefit from wider yardage, Shape-Flex® is also available in a 60" width.
Width: 20"
Bolt Length: 25 yards
Fiber Content: 100% Cotton
Weight: Lightweight
Application: Fusible (1-sided)
Construction: Woven
Color: Black and White
Follow the manufacturer's pressing instructions.
Test on a fabric scrap before fusing.
Pre-shrinking is recommended when working with fabrics that will be laundered.
Store rolled or flat to prevent creasing.
Pellon® P44F Fusible Light-Weight Non-Woven Interfacing is a lightweight general-purpose interfacing designed to provide gentle stability without significantly increasing the bulk of a project. Unlike woven or knit interfacings, its non-woven construction has no grain, allowing it to be cut in any direction without affecting its performance. It offers dependable support for lightweight to medium-weight fabrics while remaining easy to work with, making it a popular everyday choice for a wide variety of sewing projects.
Width: 20"
Bolt Length: 48 yards
Fiber Content: 100% Polyester
Weight: Lightweight
Application: Fusible
Construction: Non-Woven
Color: White
Follow the manufacturer's pressing instructions
Test on a fabric scrap before fusing
Allow the adhesive to cool completely before handling
Store rolled or flat to prevent creasing
Pellon® 950F ShirTailor® is a medium-weight woven fusible interfacing developed specifically for areas that require crisp structure and lasting stability. Heavier than Shape-Flex®, it provides additional support while still allowing the fabric to retain a natural woven character. Its balanced construction makes it particularly well suited for shirt collars, cuffs, plackets, waistbands, and other tailored details where clean edges and dependable structure are essential, while avoiding excessive stiffness.
Width: 20"
Bolt Length: 10 yards
Fiber Content: 100% Polyester
Weight: Medium Weight
Application: Fusible (1-sided)
Construction: Woven
Color: White
Follow the manufacturer's pressing instructions
Test on a fabric scrap before fusing
Use firm, even pressure to ensure proper adhesion
Store rolled or flat to prevent creasing
Pellon® 906F Fusible Sheerweight Polyester Interfacing is an ultra-lightweight non-woven interfacing developed for delicate fabrics that require subtle reinforcement without noticeably changing their appearance or drape. Compared to heavier non-woven interfacings, it provides a softer hand while helping prevent stretching and distortion in lightweight garments and accessories. Its sheer construction makes it an excellent choice whenever support is needed without adding unnecessary bulk.
Width: 20"
Bolt Length: 30 yards
Fiber Content: 100% Polyester
Weight: Ultra Lightweight
Application: Fusible
Construction: Non-Woven
Color: White
Follow the manufacturer's pressing instructions
Test on a fabric scrap before fusing
Use a press cloth when working with delicate fabrics
Store rolled or flat to prevent creasing
Pellon® 855F Tailor’s Elite™ Interfacing is a premium non-woven fusible interfacing designed to provide firm, dependable support while maintaining a smooth, professional finish. Heavier than lightweight non-woven interfacings, it adds stability to garment details that benefit from additional structure without the complexity of traditional tailoring canvases. Its durable construction helps collars, cuffs, waistbands, facings, and similar areas retain their shape through repeated wear, yet the interfacing remains easy to apply. Black and white variants are available.
Width: 20"
Bolt Length: 10 yards (@ White) and 25 yards (@ Black)
Fiber Content: 100% Polyester
Weight: Medium Weight
Application: Fusible (1-sided)
Construction: Non-Woven
Color: Black and White
Follow the manufacturer's pressing instructions
Test on a fabric scrap before fusing
Apply firm, even pressure for proper adhesion
Store rolled or flat to prevent creasing
Pellon® 541 Wash-N-Gone® is a sew-in water-soluble stabilizer designed to provide temporary support for embroidery, appliqué, lacework, and other decorative stitching. Unlike tear-away stabilizers, it remains in place throughout stitching before dissolving completely in water, making it an excellent choice for projects where clean removal is essential. Because it washes away rather than being torn away, it is especially well suited for delicate fabrics and intricate embroidery that could be distorted by mechanical removal.
Width: 19"
Bolt Length: 10 yards
Fiber Content: 100% PVA
Weight: Lightweight
Application: Sew-In
Removal Method: Wash-Away
Construction: Water-Soluble Stabilizer
Color: White
Position beneath or behind the fabric before stitching
Complete all embroidery before removing the stabilizer
Dissolve according to the manufacturer's washing instructions
Allow the project to dry completely after rinsing
Pellon® 371 Fuse-N-Tear® combines the convenience of a fusible stabilizer with the easy removal of a tear-away backing. The temporary fusible adhesive holds fabrics securely in place during embroidery or decorative stitching, helping reduce shifting and distortion without the need for excessive pinning or basting. Once stitching is complete, the excess stabilizer tears away cleanly, providing reliable support throughout construction without becoming a permanent part of the finished project.
Width: 20"
Bolt Length: 10 yards
Fiber Content: 70% Polyester / 30% Rayon
Weight: Lightweight
Application: Fusible (1-sided)
Removal Method: Tear-Away
Construction: Non-Woven Stabilizer
Color: White
Fuse according to the manufacturer's pressing instructions
Stitch as desired
Tear away excess stabilizer after construction
Test on a fabric scrap before use
Comfort Cloud Batting is a low-loft quilt batting designed to provide softness, warmth, and body without excessive bulk. “Low loft” means the batting has a relatively thin, even profile rather than creating pronounced puffiness between quilted layers. Made from an 80% cotton and 20% polyester blend with an integrated scrim, it combines the breathability and natural feel of cotton with the added durability and stability of polyester fibers. The scrim helps hold the batting together during quilting, allowing it to resist shifting and stretching while maintaining a smooth, even loft throughout the finished project. Its balanced construction makes it suitable for projects requiring both comfort and reliable structural support.
Width: 96"
Roll Length: 30 yards
Fiber Content: 80% Cotton, 20% Polyester (with scrim)
Weight: Medium Weight (4.5 oz)
Stretch: None
Opacity: Opaque
Drape: Moderate
Finish: Needle-Punched Batting with Scrim
Machine wash up to 104°F (40°C).
Tumble dry on low heat.
Store rolled or loosely folded to preserve loft.
No results match your search. Try removing a few filters.